.avif)
Why Metal Roofing on the North Shore?
Durability
ProVia metal shingle profiles are stamped from 26-gauge steel, up to 30% thicker than the industry standard. That extra gauge takes the hail and lake-effect snow loads that hit Lake County roofs every few years without the granule loss or cracking asphalt tends to show after repeated impacts. Standing seam systems go a step further with concealed fasteners that hold through high-wind events, leaving no exposed screw points to loosen over time.
Climate Fit
Metal expands and contracts as temperatures swing, so fastener method matters on a roof that can see a 40-degree change over a single weekend. Standing seam systems use concealed clips that let the panels move with the freeze-thaw cycle instead of working loose over the years. Metal also sheds ice and snow faster than asphalt on low-slope sections, which lowers ice dam risk on the roof shapes you see most often around here.
Low Maintenance
Metal roofing does not lose granules, crack from UV exposure, or need periodic sealing. Unlike wood shakes, there is no moss or mold remediation cycle. The typical maintenance routine is a visual check after major storms and keeping gutters clear, the same schedule any well-built roof requires.
Warranty
ProVia stands behind its metal roofing with a 50-year transferable Lifetime Limited Warranty. That transferable piece carries real weight on the North Shore, where buyers regularly ask for documented roof coverage when a home changes hands. Ask us to walk through the warranty specifics when you book your estimate.
Aesthetics
ProVia shake and slate profiles replicate the look of cedar shake or natural slate without the weight, maintenance, or ecological impact. For the older Tudor, craftsman, and colonial homes in Highland Park and Lake Forest, a ProVia slate profile can match the architectural character of the block while delivering modern metal performance underneath.
Long-Term Value
Metal costs more upfront than asphalt, but the lifespan gap is hard to ignore. A standing seam roof installed today may still be performing 40 to 70 years from now. For long-term owners, metal roofing in North Shore neighborhoods often tells a better cost-per-year story than swapping out asphalt every 20 to 30 years, especially for homeowners who plan to pass the house down. Cool-coat metal options can trim summer cooling costs on top of that.
Metal Roofing Styles We Install
We install two main metal roofing systems, each matched to a different home style and set of performance priorities. Here is how they tend to break down on a typical North Shore job.
Standing Seam Metal Roofing
Standing seam is the benchmark in metal roofing, easy to spot by the raised seams running vertically up the slope. Concealed fasteners remove the exposed screw points that invite leaks, and they give the roof a clean, architectural line. It is a natural fit for contemporary homes and for anyone who wants the lowest-maintenance metal option on the market.
ProVia Metal Shake Roofing
ProVia metal shake panels are embossed and variegated to mirror the depth and texture of real cedar shake. They are stamped from 26-gauge steel and carry ProVia's 50-year transferable warranty. This is the profile we point homeowners toward for craftsman bungalows and older North Shore homes, where the look of the neighborhood matters as much as the performance spec.
ProVia Metal Slate Roofing
ProVia slate gives you the natural-slate look without the brutal weight that comes with the real thing. Natural slate can run past 800 pounds per square foot. ProVia metal slate weighs a sliver of that and needs no framing reinforcement on most houses. It fits the Tudors and colonials you see all over Winnetka and Lake Forest.
Metal Roof Cost on the North Shore
Metal costs more than asphalt upfront, and the range is genuinely wide. Residential standing seam runs $9 to $18 per square foot in Illinois, based on 2025 to 2026 market data. The table below shows where each tier lands, so you can see roughly what metal roofing cost in North Shore projects looks like before anyone hands you a quote.
What Affects Your Metal Roof Price
The spread above is real, and a few things drive it. System choice does most of the work: standing seam costs more than corrugated panels, and a premium gauge costs more than a standard one. Pitch and complexity push the number the way they do with any material, since steep or multi-gable roofs eat more time per square. On North Shore lots, the wooded ones especially, protecting landscaping and getting crews and material to the roof adds hours to the job.
HX Home Solutions provides free on-site estimates with no obligation. We offer financing for homeowners who qualify, and we help clients through the insurance process when storm damage is involved. Read our roof replacement cost guide for a broader breakdown of what drives roofing prices.
Metal vs. Asphalt Roofing
Asphalt is still the default on the North Shore, and for plenty of homes it is the right call. Metal earns its 2 to 3 times higher upfront cost when you plan to stay 30 years or more, or when you have a specific reason to want what it does better. Here is the head-to-head on the questions homeowners actually ask.
If you are weighing both options, see our asphalt roofing page for North Shore-specific cost ranges and project examples.
North Shore Metal Roofing, Family-Owned Since 1950
HX Home Solutions has been putting exterior systems on North Shore homes since 1950. That is not a line for a brochure. We have seen exactly what a Lake County freeze-thaw cycle does to a standing seam panel that was fastened incorrectly, and we install the systems that hold. Our crews are factory-certified for ProVia, which is a hard requirement to touch the product at all. We were one of the first contractors in Lake County to offer ProVia metal roofing, and it has earned its spot in how we work.
Homeowners across Highland Park, Northbrook, and Glenview rate us 4.9 stars over 179 Google reviews. The team is small on purpose. You deal with the same faces from the first estimate to the final cleanup, which is the kind of thing people want from a ProVia metal roofing contractor in North Shore work, not a rotating cast of subs.
Our Metal Roofing Process
Here is how a metal roof goes in, from first visit to final sweep, in the order it really happens.
Step 1: On-Site Consultation
We come out, inspect the roof you have, and hand you a detailed written estimate covering system options, material costs, and timeline. No script. No pressure. You get what you need to decide on your own clock.
Step 2: System and Profile Selection
We walk you through standing seam versus shingle and bring ProVia samples so you can hold each one up against your siding and trim in real daylight. For shake and slate, we match the profile to the character of your house instead of guessing.
Step 3: Roof Prep and Tear-Off
Tarps go down over landscaping, driveway, and gutters before anything comes off the roof. Magnetic rollers chase down stray nails in the yard. Old material is stripped and hauled the same day, and the decking gets inspected so any rotted sections are replaced before new panels go on.
Step 4: Installation
Standing seam panels are attached with concealed clips that allow thermal movement without loosening over time. ProVia shingle profiles are installed to factory spec by our certified crew. Flashing, ridge caps, and pipe penetrations are finished before the crew leaves for the day. Most residential metal replacements on the North Shore are completed in two to four days.
Step 5: Final Walkthrough and Inspection
We walk the finished roof with you before anyone calls it done. You flag anything you want a second look at, and we handle it on the spot. Cleanup ends with one more magnetic sweep of the grounds.
Step 6: Ongoing Support
Your ProVia warranty paperwork comes packaged with the completed project file. We pick up the phone after the job, too. If a storm does damage, we help you size it up and get the insurance process moving.
Metal Roofing Across the North Shore
HX Home Solutions installs standing seam metal roofing in Lake County, IL, and across the North Shore suburbs. If you have ever typed "metal roof installation near me" into Google, you already know the quotes come back all over the map. Find local project experience for your area below.
Location Pages
We also serve Highland Park, Lake Forest, and Winnetka with metal roofing installations. Contact us for project experience in those areas.
